Custom - Wireless Access Point
You can use the TV as a wireless access point and connect the network
equipment without an access point.
Confirm the PIN code, network settings of the equipment before starting
●
setup. For details, read the manual of the equipment.
1. Display the menu with
2. Select
Network
with
/
/
/
3. Select
Connect to device in WPS
To set manually, select
●
4. Select and set
WPS(Push button)
access
WPS(Push
button):
Set the equipment to WPS (Push button) mode. For details, read the
manual of the equipment.
WPS(PIN):
Enter the PIN code of the equipment.
If the connection has failed, check the settings and positions of the
●
equipment. And then, follow the on-screen instructions.
■
Change settings
You can set up
Network
Channel setting method
Follow the on-screen instructions and set manually.
Set
Reset settings
●
= Note =
You cannot connect the internet service while the TV is set to
●
Access
Point.
You can connect up to 7 devices. But the transfer rate will vary according
●
to communication environment or the numbers of connected equipment.
To confirm the current network settings
●
Home network
Ensure the equipment to connect supports WPS for this setup.
●
WPS: Wi-Fi Protected Setup™
●
MENU
Network Connection
and press
OK
to access
with
Change
settings. (see below)
/
WPS(PIN)
name(SSID),
Encryption
manually.
to reset the items of
Network settings
- 101 -
Custom
Wireless Access Point
/
and press
OK
with
/
and press
key,
Wireless type
Change
settings.
Network Status
to access
OK
to
and
Wireless