Table of Contents
Advertisement
In each Viewing Mode, Backlight, Contrast, Brightness, Colour, Tint,
Sharpness,
Colour
Temperature,
Ambient
Sensor,
Noise
Caption
Smoother,
Brilliance
Smooth Film
can be adjusted and stored.
When in
True
Cinema,
can be adjusted additionally. The settings in
Professional1 / 2
mode can be stored for each input.
You can set
Viewing Mode
●
Ambient Sensor
1. Display the menu with
2. Select
Picture
3. Select
On
/
Off
with
Ambient Sensor
(On
/ Off)
Automatic Brightness Control function
●
Adjusts picture settings automatically depending on ambient lighting
conditions.
Auto power standby function
The TV will automatically go into Standby mode in the following conditions:
Off Timer
is active.
●
Watching
No operation is performed for 4 hours while
●
Settings
No signal is received and no operation is performed for 10 minutes while
●
No signal Power off
Settings
= Note =
This function does not affect the recording of
●
Touch
Recording.
Vivid
Colour,
Reduction,
MPEG
Enhancer,
Custom
or
Professional1 / 2
in 2D and 3D mode for each.
MENU
Ambient Sensor
with
/
and press
Basic
Off Timer
Timer
Auto Standby
is set to On.
Timer
No signal Power off
- 35 -
Adaptive Backlight
Remaster,
Resolution
Intelligent Frame Creation
mode,
Advanced Settings
True
Cinema,
Custom
/
and press
OK
OK
to set
Auto Standby
Timer Programming
Control,
Remaster,
and
24p
or
to access
is set to On.
and
One
Advertisement
Table of Contents
