Table of Contents
Advertisement
2. Select the channel with
3. Search with
/
4. Select
Store
with
If a VCR is connected only with the RF cable, select channel position 0.
●
Update Channel List
By updating the Digital TV channel list, you can add new channels, delete
removed channels or change channel names and positions automatically.
The channel list is updated while keeping your settings in
●
Channel
List,
Child
Depending on the signal condition, the update may not work properly.
●
New Channel Message
Selects whether to give a notification message when a new Digital TV
channel is found or not.
When a notification message appears, you can perform
●
List
pressing OK.
Sometimes, mainly during summer months at night, the TV may pick up
●
distant TV stations outside your broadcast due to favourable short term
ionosphere conditions. In such circumstances when you press OK, the TV
does not add any new channels. This is normal.
Signal Condition
Selects a channel and checks the signal condition with indicators.
A good Signal Strength is not an indication of suitable signal for Digital TV
●
reception.
To change the channel
●
For Digital TV
●
Add TV Signal
Adds the TV mode.
This function is available if you skip any modes to tune in
●
first using the TV.
Channel Up /
Down.
.
/
and press
OK
Lock, etc.
- 78 -
to set.
Favourites
Update Channel
Auto Tuning
Edit,
for
Advertisement
Table of Contents
