Loading Paper Into The 1St Tray - Konica Minolta 7216 User Manual

3

Loading Paper Into the 1st Tray

1
Pull out the 1st Tray.
? Have the necessary precautions
been observed when pulling out
the tray?
§ Be careful not to touch the
surface of the Paper Take-up
Roller with your hands.
2
Press down on the Paper-Lifting
Plate until it locks into place.
3
Load the paper into the tray so that
the front side of the paper (the side
facing up when the package was
unwrapped) faces up.
? Have the necessary precautions
been observed when loading
the paper?
§ Do not load so much paper that
the top of the stack is higher than the
4
Slide the paper guides against the
edges of the paper.
Is the paper guide positioned
?
correctly?
§
Make sure that the paper guides
are pushed up against the
edges of the paper.
3-4
Basic Operations
Paper Take-up Roller
Paper-Lifting Plate
mark.
7216/7220