Precautions
Auto Reset
With the auto reset operation, the Copy mode screen appears after
copying or after a specified length of time has passed after the last
operation is finished. (Manufacturer's default setting: 1 minute)
Tip
The length of time until the auto reset operation is performed can be
set to 30 seconds or a setting between 1 and 5 minutes.
In addition, the Auto Reset function can be disabled.
For details, refer to chapter "7 Utility Mode – Copy Functions [CD]".
Power Save Mode
With the Power Save mode, the machine automatically enters a standby
mode (Power Save mode), instead of turning off.
When the machine is in Power Save mode, the indicator on the [Start] key
remains lit in green, but the display goes off.
Note
If the Auto Shut Off function is activated during Power Save mode, the
machine turns off.
Conditions for entering Power Save mode
G
The [Power Save] key is pressed.
G
The specified length of time after the last operation has elapsed.
(Manufacturer's default setting: 15 minutes)
Tip
The length of time until the machine enters Power Save mode can be
set between 1 and 240 minutes. (Refer to chapter "7 Utility Mode –
Copy Functions [CD]".)
7216/7220
2
2-21