Positioning Transparent Documents On The Original Glass - Konica Minolta 7216 User Manual

3

Positioning transparent documents on the Original Glass

When copying a highly transparent or translucent document, such as OHP
transparencies, tracing paper or diazo photosensitive paper, position it as
described below.
1
Lift open the Platen Cover, or the Document Feeder if it is installed.
2
Position the document to be copied
face down on the Original Glass.
H
Align the document on the
scales above and to the left of
the Original Glass.
3
Place a blank sheet of paper of the
same size over the document.
4
Carefully close the Platen Cover, or
the Document Feeder if it is
installed.
5
If necessary, specify any other copy
settings.
H Before Making Copies (p. 5-1)
H
Advanced Copy Operations (p. 6-1)
6
Press the [Start] key.
3-10
Basic Operations
7216/7220