White Balance - Panasonic HDC-SD600 Operating Instructions Manual

White balance

The automatic white balance function may not reproduce natural colours depending on the
scenes or lighting conditions. If so, you can adjust the white balance manually.
≥ Press the iA/MANUAL button to switch to manual mode. (l 69)
1
Touch [WB].
2
Touch /
balance mode.
AWB
F
FOCUS WB
≥ Select the optimal mode by confirming the
colour on the screen.
Icon Mode/Recording conditions
Auto white balance
AWB
adjustment
Sunny mode
Outdoors under a clear sky
Cloudy mode
Outdoors under cloudy sky
Indoor mode 1
Incandescent light, video lights
like in the studio, etc.
Indoor mode 2
Colour fluorescent lamps,
sodium lamps in gymnasiums
etc.
Manual adjustment mode
≥ Mercury-vapor lamps, sodium
lamps, some fluorescent lights
≥ Lights used for wedding
receptions at hotels, stage
spotlights in theaters
≥ Sunrise, sunset, etc.
≥ To return to auto setting, set to
press the iA/MANUAL button again.
70
VQT2V00
to select white
SHTR IRIS
AWB
∫ To set the white balance
manually
1 Select
white subject.
2 Touch and set the blinking
F
≥ When the screen turns black instantly and
the display stops flashing and then
lights constantly, the setting is complete.
≥ If the display continues flashing, the
white balance cannot be set. In this case,
use other white balance modes.
≥ When the
white balance previously adjusted is
stored. Whenever recording conditions
change, re-set the white balance.
≥ When setting both the white balance and
the iris/gain, set the white balance first.
≥ is not displayed on the screen
AWB
when
AWB
or
, fill the screen with a
FOCUS WB SHTR IRIS
display flashes, the manual
is being set.
.