Dividing A Scene To Partially Delete - Panasonic HDC-SD600 Operating Instructions Manual

Dividing a scene to partially delete

To delete an unnecessary portion of a scene, first divide the scene and then delete the
unnecessary portion.
≥ Change the mode to
media to divide a scene. (l 28)
1
Select the menu.
: [EDIT SCENE] # [DIVIDE] # [SET]
2
Touch the scene to be divided.
3
Touch to set the dividing point.
≥ Using slow-motion playback or frame-by-frame
playback makes it easy to search for the point where
you want to divide the scene. (l 73)
≥ Touch [YES] to continue dividing the same scene. To
continue dividing other scenes, touch [NO] and
repeat steps 2-3.
4
Press the MENU button to complete dividing.
5
Delete the unnecessary scene. (l 82)
To delete all the divided points
[DIVIDE] # [CANCEL ALL]
≥ The scenes that were deleted after division cannot be recovered.
≥ You cannot divide a scene if you are playing back a disc with a DVD burner (optional)
connected, or if the number of scenes of a given date would exceed 99 scenes.
≥ It may not be possible to divide scenes with a short recording time.
≥ Data that has been recorded or edited on another device cannot be divided and the divided
points cannot be deleted.
≥ If personal information in the divided scenes is deleted, the personal information is deleted
when the divided scenes are cancelled.
84
VQT2V00
and touch the play mode select icon to select desired
0h00m00s 0h00m00s 0h00m00s