About Recovery - Panasonic HDC-SD600 Operating Instructions Manual

About recovery

If faulty management information is found, the messages may appear and a repair is
performed. (Repairing may take time depending on the error.)
SOME SCENES NEED REPAIRING. PLAY SCENES TO BE REPAIRED.
(IRREPARABLE SCENES WILL BE DELETED.)
≥ The above message is displayed when abnormal management information is detected
when the scenes are displayed in thumbnail. To perform the repair, touch the scene with
in the thumbnail, and start the playback. Please be aware that if the repair fails,
scenes with
≥ Use a sufficiently charged battery or the AC adaptor.
≥ Depending on the condition of the data, it may not be possible to completely repair the data.
≥ When data recorded on another device is recovered, it may not be possible to play back
the data on this unit or the other device.
≥ If recovery fails, turn the unit off and on again after waiting a while. If recovery fails
repeatedly, format a media on the unit. Please be aware that if a media is formatted, then
all the data recorded on the media will be erased.
≥ If the thumbnail information is recovered, displaying the thumbnails may become slower.
118
VQT2V00
will be deleted.