Code 39 Selection - Hand Held Products Scanteam 5700 User Manual

✱ Default All Code 39 Settings ✱

Code 39 Selection

✱
On
Transmit
✱
Enable
Enable
] A two-digit number is required after scanning this programming bar code.
Scan your selection on the Programming Chart (inside back cover).
Programming Tip: If a symbology will not be used, we recommend turning it
off to minimize the chance of a misread.
4–4 SCANTEAM 5700 User's Guide
Code 39
Start / Stop
Characters
✱
Don't Transmit
Full ASCII
Refer to the Full ASCII
Chart on page 4–6.
Disable
Append
✱
Off
Disable