Hand Held Products 4410, 4710 User Manual page 120

Reading Multi-Row OCR
The IT4410/4710 is capable of decoding multi-row OCR text. Consider the
following example. This example shows serial commands as would be entered
using Quick*View.
Example G: You need to read multiple rows of OCR data as shown below:
To read the first row of OCR data, you would menu the following template:
This template is the default OCR template. If you wanted to read the second
line of data, you would use the following template:
To read both lines of OCR at one time, use the variable r to indicate the start
of a new row. All of the other templating variables for the individual rows work
the same as previously described. For instance, in the above example, you
would use the following template to read both rows:
To read the three rows below, you would use the template command
"OCRTMP"ddddddddrllllllllrlllldddd".
Note: Note: Reading more than three rows of OCR is not recommended.
Contact the factory if you have an application that requires reading 4 or
more rows of OCR.
4 - 8
12345678
ABCDEFGH
OCRTMP"dddddddd".
OCRTMP"llllllll".
OCRTMP"ddddddddrllllllll".
12345678
ABCDEFGH
ABCD1234
IMAGETEAM™ 4410/4710 User's Guide