Shaping Biscuits; Adding Decorations; Refilling With Pastry Or Decorative Mixture - Bifinett KH 1191 Operating Instructions Manual

Shaping biscuits

Tips:
• Use exclusively the motif discs
shaping the biscuits.
• Line the baking tray with baking paper.
Do not use Teflon, fats or oil paper, as
the biscuits then do not keep their
shape.
• Ensure that the lock ring
on the container
tainer is correctly mounted on the
motor unit before you switch the
appliance on.
1. Place the direction switch
arrow pointing upwards
2. Direct the biscuit shaper over the
baking tray.
3. Press on the start switch
first biscuit has been formed.
4. Release the start switch
the biscuit shaper at another position.
How long you must press the start
switch is dependant on the desired
size and shape of the biscuit. If you
press the start switch
you will form a small biscuit. The longer
you press the start switch
the biscuit will be.
5. Repeat the steps until you have shaped
a sufficient number of biscuits.
Note: Should the pastry be too sticky,
place it in the refrigerator for 15
minutes.
for
sits firmly
and that the con-
onto the
.
until the
and direct
only shortly,
, the larger
- 7 -

Adding decorations

Tips:
• Use the nozzles
shaping fluid-like substances, such as
whipped cream.
• The decoration substance must have
a soft and creamy consistency, other-
wise it will block the nozzle
• Press the start switch
to start with, to see how the substance
responds. It can happen that the sub-
stance may continue to flow out for
a short time.
1. Place the direction switch
arrow pointing upwards
2. Place the lock device on the nozzle
adaptor onto "OPEN".
3. Hold the Biscuit Shaper at a slight angle.
4. Press the start switch
5. As soon as the decorative substance
starts to flow from the nozzle
the Biscuit Shaper in accord with the
decorative design you wish to create.
Note: Should the pusher
during use, it could be that the sub-
stance or the pastry is too firm.
Remove all of the substance resp.
the pastry and, if possible, blend
some fluids into it.
Refilling with pastry or decorative
mixture
1. Place the direction switch
arrow pointing downwards
2. Press and hold the start button
until the pusher has returned itself
to the MAX marking.
KH1191
exclusively for
.
only shortly
onto the
.
.
, move
block
onto the
.