Technical Data; Appliance Description; Before The First Use; Assembling The Biscuit Shaper - Bifinett KH 1191 Operating Instructions Manual

Technical data

Mains voltage:
Power rating:
Continuous
operating time:
Protection class:

Appliance description

Direction switch
Start switch
Power cable with power plug
Motor unit
Threaded rod
Pusher
Container
Nozzle adapter with seal
Nozzles
Adapter lock
Lock ring
Motif discs

Before the first use

Take the Biscuit Shaper and all accessories
from the packaging and remove all
packaging material.
Clean all of the components as described in
the section „Cleaning and care".
220 - 240 V / 50Hz
12 W
1 Minute
II
- 5 -

Assembling the Biscuit Shaper

Note: Remove the power plug
from the wall socket before assem-
bling accessories.
Inserting the threaded rod with pusher
1. Place the end of the threaded rod
in the motor unit
pins inside the motor unit
with the guide rails on the threaded
rod .
2. Slide the threaded rod
pusher as far as it will go into the
motor unit .
Assembling the container
Note: The container
ted, otherwise the Biscuit Shaper
will not function!
1. Slide the container
such that the guide rails inside the
container engage in the in notches
on the pusher
2. Place the container
unit so that the arrow on the con-
tainer points to the open lock
on the motor unit
3. Turn the container
on the container points to the
closed lock on the motor unit
4. Insert the power plug
socket.
5. Place the direction switch
arrow pointing downwards
6. Press and hold the start button
until the pusher has returned itself
to the MAX marking.
7. Remove the power plug
wall socket.
KH1191
. Ensure that the
engage
with the
must be fit-
over the pusher
.
on the motor
.
until the arrow
.
into a wall
onto the
.
from the