Introduction; Product Overview - D.T.Systems BTB 800 Owner's Manual

Thank you for choosing a D.T. Systems
The BTB 800 and BTB 809 give you the ability to keep track
of your dog's location when he is out of sight and lets you
know when he has gone on point. This allows you to find
the dog quickly and prevents you from making the mistake
of calling the dog to you when he's on point.
The BTB 800 and BTB 809 beeper collars are light weight
and built to withstand the rugged conditions and heavy cover
dogs often encounter.
The use of both the sound booster element and the long
duration, double beep make the BTB 800 and BTB 809
collars much easier to hear at long range. (Actual yardage
will vary depending upon the relative position of yourself
and your dog and other variables such as cover and wind
speed and direction).
The BTB 800 and BTB 809 have two operating modes, Run/
• When Run/Point is selected the collar will emit a
double beep every five seconds while the dog is
running and will emit a double beep every two
seconds when the dog is on point.
• When the Point only mode is selected the collar
will emit a double beep every two seconds when
the dog is on point but will remain silent when the
dog is running.
The on/off switch must be depressed for two full seconds to
shut the collar off. This prevents the collar from accidentally
shutting off when the dog is running through heavy cover.

INTRODUCTION

Beeper Collar!

PRODUCT OVERVIEW

Point and Point only.
3