Minimum Alcove Clearance To Combustible Materials; Additional Clearances For Backwall Exit - HAMPTON BAY H200 Owners & Installation Manual

INSTALLATION
MINIMUM ALCOVE CLEARANCE TO
COMBUSTIBLE MATERIALS
This Hampton Freestanding model has been alcove approved and must be installed
with a listed double wall connector to the ceiling level.
Note: Minimum alcove ceiling height (from fi nished fl oor) - 60" (1525 mm)
Maximum depth of alcove - 48" (1220 mm)
Unit (with Heat Shield)
H200
Minimum Clearance to Combustibles
Unit (with Heat Shield)
H200
Minimum Clearance to Non-Combustibles
Unit (with Heat Shield)
H200
Min. Mantel Height (from fi nished fl oor):
Max. Mantel Depth:
10
From
Unit
G H
15" (381 mm) 13" (330 mm) 27" (686 mm)
ADDITIONAL CLEARANCES
FOR BACKWALL EXIT
From
Unit
A B
9" (228 mm) 15" (381 mm)
From
Unit
A B
min. 0" (0 mm) 15" (381 mm)
max. 9" (228 mm)
48" (1219 mm)
12" (305 mm)
From Flue Min.
Center-line Width
I J K
15-1/8" (384 mm) 54" (1372 mm) 50" (1270 mm)
Note: Floor Protection must extend 2" (50mm)
to each side of the elbow.
Hampton H200 Cast Freestanding Woodstove
Min.Hearth
to Rear Wall
L