Setting Up The Radio; Presetting Stations Automatically; Confirming The Preset Channels; Manual Tuning - Panasonic SC-PT470 Operating Instructions Manual

Setting up the radio

PLAY MODE
Numbered
buttons
OK
MENU

Presetting stations automatically

Up to 30 stations can be set.
1
RADIO
EXT-IN
2
MENU
PLAY
LIST
3
OK
(press and hold)
≥"SET OK" is displayed when the stations are set, and
the radio tunes to the last preset station.
≥"ERROR" is displayed when automatic presetting is
unsuccessful. Preset the channels manually (
10
PLAY MODE
1 2 3
4 5 6
7 8 9
0 10
RADIO
RADIO
EXT-IN
SEARCH
,
SEARCH SEARCH
SKIP SKIP
,
FUNCTIONS
OK
MENU
-TUNE MODE/—FM MODE
MEMORY
SELECTOR TUNE
Select "FM".
≥This unit:
Press [SELECTOR].
Each time you press the
button:
LOWEST (factory preset):
To begin auto preset with
the lowest frequency.
CURRENT:
To begin auto preset with
the current frequency.
To change the frequency,
§
refer "Manual tuning"
( right).
Release the button when
"FM AUTO" is displayed.
e.g. Display
≥This unit:
Press and hold [MEMORY].
The tuner starts to preset
all the stations it can
receive into the channels in
ascending order.

Confirming the preset channels

1
RADIO
EXT-IN
2
1 2
4 5
7 8
0
≥The FM setting is also shown on the TV display.
If noise is excessive
Press and hold
[PLAY MODE] (this unit:
[—FM MODE]) to display
"MONO".
Press and hold the button again to cancel the mode.
§
≥The mode is also cancelled when you change the
frequency.

Manual tuning

1
RADIO
EXT-IN
2
SEARCH
11).
Select "FM".
≥This unit:
Press [SELECTOR].
Select the channel.
≥To select a 2-digit number
3
e.g. 12: [S10]
6
e.g. Display
9
10
Alternatively, press [X, W].
≥This unit:
Press [-TUNE MODE] to
select "PRESET" on the
display, and then press
[X TUNE W] to select the
channel.
When a stereo FM
broadcast is being
received, "ST" lights in the
display.
e.g. Display
e.g. Display
MONO
Select "FM".
≥This unit:
Press [SELECTOR].
Select the frequency.
SEARCH
≥This unit:
Press [-TUNE MODE] to
select "MANUAL" on the
display, and then press
[X TUNE W] to select the
frequency.
≥To start automatic tuning,
press and hold [6, 5]
(this unit: [X TUNE W])
until the frequency starts
scrolling. Tuning stops
when a station is found.
[1] [2]
ST