Download  Print this page

Selecting The Source By The Remote Control; Enjoying Surround Sound Effects - PANASONIC SC-PT470 Operating Instructions Manual

Dvd home theater sound system model no.sc-pt470.
Hide thumbs

Advertisement

Selecting the playback source (continued)
DVD
USB, iPod
SETUP

Selecting the source by the remote control

DVD
RADIO
EXT-IN
USB
iPod
Press [SELECTOR] on this unit to select source from this
unit. (
39)
Enjoying sound from all speakers and various sound
effects
SURROUND
SETUP,
−CH SELECT
≥The following sound effects may not be available or
have no effect with some sources, or when headphones
are used (
39).
≥You may experience a reduction in sound quality when
these sound effects are used with some sources. If this
occurs, turn the sound effects off.
12
USB
RADIO
RADIO, EXT-IN
DVD
iPod
EXT-IN
START
SETUP
DVD/CD (
9)
Each time you press the button:
FM (
10)
AV: For audio input through the
SCART (AV) terminal.
AUX
:
For audio input through the
§
AUX terminal.
D-IN
:
For audio input through the
§
OPTICAL IN terminal.
(
right)
"(TV)" will appear beside "AUX"
§
or "D-IN", indicating the TV audio
setting for VIERA Link "HDAVI
Control" (
24).
USB (
21)
iPod (
22)
+,
VOL
SURROUND
SOUND
SOUND
OK
OK
SETUP
W.SRD
W.SRD
-CH SELECT
[Note]
Confirm the audio connection to the SCART (AV), AUX or
OPTICAL IN terminal on this unit when you select the
corresponding sources (
to its minimum, and then adjust the volume of this unit.
Making settings for digital audio input
Select to suit the type of audio from the OPTICAL IN
terminal on this unit.
1 While in "D-IN" mode
Press [SETUP] to select "MAIN/SAP", "DRC" or
"PCM FIX".
2 While the selected mode is displayed
Press [3, 4] to make the setting.
MAIN/SAP mode (Only works with Dolby Dual Mono):
MAIN, SAP
"SAP" = Secondary Audio Program
§
Dynamic Range Compression
DRC ON: Adjust for clarity even when the volume is
DRC OFF: The full dynamic range of the signal is
PCM FIX mode
PCM ON: Select when receiving only PCM signals.
PCM OFF: Select when receiving Dolby Digital and
(When receiving true 5.1-channel surround sound, select
"PCM OFF".)
[Note]
≥Audio that is input through the OPTICAL IN terminal is
not output from the HDMI terminal.
≥Underlined items in the above are factory settings.

Enjoying surround sound effects

VOL
SURROUND
7). Reduce the volume on the TV
, MAIN+SAP
(stereo audio)
§
§
low by compressing the range of the lowest
sound level and the highest sound level.
Convenient for late night viewing. (Only
works with Dolby Digital)
reproduced.
PCM signals.
SURROUND OUTPUT indicator on
this unit will light up when there is
surround sound effect.
Each time you press the button:
STANDARD:
Sound is output as it was recorded/
encoded. Speaker output varies
depending on the source.
MULTI-CH:
You can enjoy sound from the front
speakers, as well as the surround
speakers even when playing a
2-channel sound or non-surround
sound.
MANUAL: (
13)

Advertisement

Table of Contents

   Also See for PANASONIC SC-PT470

   Related Manuals for PANASONIC SC-PT470

Comments to this Manuals

Symbols: 0
Latest comments: