Download  Print this page

Setting Up The Radio; Presetting Stations Automatically; Confirming The Preset Channels; Manual Tuning - PANASONIC SC-PT70 Operating Instructions Manual

Dvd home theater sound system.
Hide thumbs

Advertisement

Setting up the radio

Presetting stations automatically

Up to 30 stations can be set.
1
Press [RADIO]@ to select "FM".
2
Press [MENU]:.
Each time you press the button:
LOWEST (factory preset):
To begin auto preset with the lowest frequency.
CURRENT:
To begin auto preset with the current frequency.
To change the frequency, refer to "Manual tuning"
§
(
right).
3
Press and hold [OK]9.
Release the button when "FM AUTO" is displayed.
The tuner starts to preset all the stations it can
receive into the channels in ascending order.
≥"SET OK" is displayed when the stations are set, and
the radio tunes to the last preset station.
≥"ERROR" is displayed when automatic presetting is
unsuccessful. Preset the channels manually (

Confirming the preset channels

1
Press [RADIO]@ to select "FM".
2
Press the numbered buttons to select a channel.
≥To select a 2-digit number
e.g. 12: [S10]3
Alternatively, press [X, W]6.
≥The FM setting is also shown on the TV display.

Selecting the playback source

Selecting the source from the START menu

You can select sound effects, desired source, or access
playback/menus by using the START menu.
1
Press [START]C to show the START menu.
This unit automatically turns on.
(The TV also turns on when using VIERA Link "HDAVI
Control". This works only when in "DVD/CD" mode
without any disc being loaded.)
e.g.
DVD/CD
Input Selection
Sound
OK
2
Press [3, 4]9 to select an item and press [OK]9.
≥To exit, press [START]C.
3
Press [3, 4]9 to make the setting and press
[OK]9.
When "Input Selection" is selected
You can select a desired source from the menu.
≥DVD/CD (
9), FM (
AUX/TV (
right), MUSIC PORT (
When "Sound" is selected
You can select sound quality settings (
When a disc is loaded, you can also access playback or
menus from the START menu.
e.g. [DVD-V]
DVD/CD
Playback Disc
TOP MENU (DVD)
MENU (DVD)
10
Input Selection
Sound
[1]
[2]
Home Cinema
10), AV (
right),
17)
11, Equalizer).
Home Cinema
Playback/menu access
If noise is excessive
Press and hold [PLAY MODE]2 to display "MONO".
To cancel the mode, press and hold the button again until
"AUTO ST" is displayed.
≥The mode is also cancelled when you change the
frequency.

Manual tuning

1
Press [RADIO]@ to select "FM".
§
2
Press [6, 5]A to select the frequency.
≥To start automatic tuning, press and hold [6,
5]A until the frequency starts scrolling. Tuning
stops when a station is found.
Presetting stations manually
Up to 30 stations can be set.
1 While listening to the radio broadcast
Press [OK]9.
right).
2 While the frequency is flashing on the display
Press the numbered buttons to select a channel.
≥To select a 2-digit number
e.g. 12: [S10]3
Alternatively, press [X, W]6, and then press [OK]9.
A station previously stored is overwritten when another
station is stored in the same channel preset.
When the on-screen control panel appears
e.g. [DVD-V] (when "Playback Disc" is selected from the
START menu)
You can operate the playback with the indicated controls.

Selecting the source by the remote control

Press
To select
[DVD]@
DVD/CD
[RADIO]@ FM
[EXT-IN]@ Each time you press the button:
AV:
AUX/TV:
MUSIC P.: For audio input through MUSIC
[Note]
Confirm the audio connection to the SCART (AV) or
AUX/TV terminal on this unit when you select the
corresponding sources (
TV to its minimum, and then adjust the volume of this
unit.
[1]
[2]
For audio input through the
SCART (AV) terminal.
For audio input through the
AUX/TV terminal.
PORT. (
17)
8). Reduce the volume on the

Advertisement

Table of Contents

   Related Manuals for PANASONIC SC-PT70

Comments to this Manuals

Symbols: 0
Latest comments: