Step 5 Smart Setup - Panasonic SC-PT470 Operating Instructions Manual

step 5 SMART SETUP
The Smart setup screen assists you to make
necessary settings.
Preparation
Turn on your TV and select the
appropriate video input mode (e.g.
VIDEO 1, AV 1, HDMI, etc.) to suit
the connections to this unit.
≥To change your TV's video input
mode, refer to its operating
instructions.
≥This remote control can perform
some basic TV operations (
DVD
DVD
1
2
DVD
3
SMART SETUP
(This unit only)
4
OK
5
OK
6
OK
38).
OK
OK
SMART SETUP
Turn on the unit.
≥When the Smart setup
screen appears
automatically, skip step 2
and 3.
Select "DVD/CD".
Show the Smart setup.
Smart setup
Would you like to start smart
setup?
Yes
No
SET
RETURN
Select "Yes".
Follow the messages
and make the settings.
( right, Smart setup
settings)
Finish Smart setup.
Smart setup settings
≥Language
Select the language used on menu screen.
≥TV aspect
Select the aspect to suit your TV.
≥Speaker check
Listen to speaker output to confirm speaker connections.
≥Auto speaker setup
Adjust the speaker output level automatically. (
≥Speaker output
Make surround sound setting for speaker output.
≥TV audio
Select the audio input connection from your TV.
For AUX connection (
For OPTICAL IN connection (
This will be the TV audio setting for VIERA Link
"HDAVI Control". ( 24)
[Note]
≥If this unit is connected to a "HDAVI Control 3 or later"
compatible TV via HDMI cable, the menu language and
TV aspect information will be retrieved via VIERA Link.
≥If this unit is connected to a "HDAVI Control 2"
compatible TV via HDMI cable, the menu language
information will be retrieved via VIERA Link.
≥Settings in the Smart setup can also be changed in the
player settings [e.g. language, TV aspect, speaker
level and TV audio ( 26)].
∫ Adjusting the speaker output level automatically:
Auto speaker setup
The speaker level settings can be optimized to
accommodate your room's listening conditions so that
you can enjoy the ideal surround sound experience.
Keep as quiet as possible during the Auto speaker
setup. Loud voices, air-conditioning noise, or
excessive wind may lead to incorrect settings. The
speakers output loud test signals during setup.
≥Place the Auto speaker setup microphone at actual
seating position. (At ear level when seated.)
≥The test signal is output from each speaker.
[Note]
Auto speaker setup can be activated through Smart
setup only.
below)
7): Select "AUX".
7): Select "DIGITAL IN".
SETUP MIC
9