Setting up the radio
Australia and N.Z.
PLAY MODE
Numbered
buttons
PLAY MODE
(Except Australia
and N.Z.)
OK
MENU
Presetting stations automatically
[Australia]and]N.Z.]
Up to 30 stations can be set in each band, FM and AM.
[Others]
Up to 30 stations can be set.
1
RADIO
EXT-IN
2
MENU
PLAY
LIST
3
OK
(press and hold)
≥ "SET OK" is displayed when the stations are set, and the radio tunes to
the last preset station.
12
SLEEP
1
2
3
4
5
6
7
8
9
0
10
PLAY
MODE
-REPEAT
RADIO
RADIO
EXT-IN
SEARCH
SEARCH
SEARCH
,
SKIP
SKIP
,
FUNCTIONS
OK
MENU
MIC VOL
ECHO
-
W.SRD
-
FL DISPLAY
-TUNE MODE/—FM MODE
TUNE
SELECTOR
[Australia]and]N.Z.]
Select "FM" or "AM".
[Others]
Select "FM".
≥ Main unit:
Press [SELECTOR].
Each time you press the button:
LOWEST (factory preset):
To begin auto preset with the lowest
frequency.
CURRENT:
To begin auto preset with the
current frequency.
§
To change the frequency, refer
§
to "Manual tuning" (
Release the button when
"FM AUTO" (or [Australia]and]N.Z.]
"AM AUTO") is displayed.
≥ Main unit:
Press and hold [MEMORY].
The tuner starts to preset all the
stations it can receive into the
channels in ascending order.
≥ "ERROR" is displayed when automatic presetting is unsuccessful.
Preset the channels manually (
Confirming the preset channels
1
2
1
4
7
MEMORY
≥ The FM ([Australia]and]N.Z.] :FM/AM) setting is also shown on the TV
display.
If noise is excessive
When "FM" is selected
Press and hold [PLAY MODE]
(main unit: [—FM MODE]) to
display "MONO".
Press and hold the button again to cancel the mode.
≥ The mode is also cancelled when you change the frequency.
[Australia]and]N.Z.] When "AM" is selected
Press [FUNCTIONS] on the remote control.
Each time you press the button: BP 2 ,# BP 1
Manual tuning
1
2
SEARCH
right).
13).
[Australia]and]N.Z.]
RADIO
Select "FM" or "AM".
EXT-IN
[Others]
Select "FM".
≥ Main unit:
Press [SELECTOR].
Select the channel.
≥ To select a 2-digit number
2
3
e.g. 12: [S10]
5
6
8
9
10
0
Alternatively, press [X, W].
≥ Main unit:
Press [-TUNE MODE] to select
"PRESET" on the display, and
then press [X TUNE W] to select
the channel.
When a stereo FM broadcast is
being received, "ST" lights in the
display.
[Australia]and]N.Z.]
RADIO
Select "FM" or "AM".
EXT-IN
[Others]
Select "FM".
≥ Main unit:
Press [SELECTOR].
Select the frequency.
SEARCH
≥ Main unit:
Press [-TUNE MODE] to select
"MANUAL" on the display, and
then press [X TUNE W] to select
the frequency.
≥ To start automatic tuning, press
and hold [6, 5] (main unit:
[X TUNE W]) until the frequency
starts scrolling. Tuning stops
when a station is found.
[1]
[2]
ST
MONO