Use your blender for soups,
sauces, drinks, pâtés,
mayonnaise, dressings etc.
CAUTION: Blending very hot
liquids may result in hot
liquid and steam being
forced suddenly past the lid
or filler cap. Allow the liquid
to cool or reduce the
quantity and select a lower
speed if available. Protect
your hands with a cloth or
oven gloves when handling
the hot goblet and lid.
Switch off and unplug:
before fitting or removing parts
Keep hands and utensils out of the
blender when it's on the power
Don't touch the sharp blades.
Don't let children or infirm people
use the machine unsupervised.
Never use a damaged machine.
Get it checked or repaired: see
Never use an unauthorised
Never leave the machine on
Don't let children play with the
When removing the blender from
the power unit:
wait until the blades have
don't accidentally unscrew the
goblet from the blade unit.
Never run the blender empty.
Only use the machine for its
intended domestic use.
Always unplug your blender
when not in use.
Only operate the blender with the
lid in place.
before plugging in
Make sure your electricity supply is
the same as the one shown on the
underside of the machine.
Important – UK only
The wires in the cord are coloured
Green and Yellow = Earth,
Blue = Neutral,
Brown = Live.
The appliance must be protected
by a 3A approved (BS1362) fuse.
WARNING: THIS APPLIANCE
MUST BE EARTHED.
to use your blender
1 Fit the sealing ring - ensuring the
For non-rewireable plugs the fuse
seal is fully located under the rim
cover MUST be refitted when
of the blade unit. Leaking will
replacing the fuse. If the fuse cover
occur if the seal is damaged
is lost then the plug must not be
or not fitted correctly.
used until a replacement can be
2 Clip the blade unit into the base.
obtained. The correct fuse cover is
3 Screw the goblet onto the blade
identified by colour and a
replacement may be obtained
from your Kenwood Authorised
Repairer (see Service).
1 - 2
If a non-rewireable plug is cut off it
must be DESTROYED
IMMEDIATELY. An electric shock
3 - 4
hazard may arise if an unwanted
non-rewireable pug is inadvertently
inserted into a 13A socket outlet.
This machine complies with
European Economic Community
before using for the first
1 Remove all packaging.
2 Wash the parts: see 'cleaning'.
To ensure long life of your blender,
never run it for longer than 60
seconds. Switch off as soon as
you've got the right consistency.
4 Put your ingredients into the
5 Push the lid seal onto the
dual action locking lid
underside of the lid.
6 Fit and lock the filler cap in the lid,
by turning one position
7 Fit the lid to the goblet and turn
the filler cap to
The filler cap can be located in 3
different positions (see
- filler cap removable for
adding ingredients to the goblet.
- lid unlocked/filler cap
locked to the lid for fitting and
removing the lid.
- lid locked.
8 Place the blender onto the power
9 Plug in and the off switch "0" will
10 Select a speed and the relevant
number will light up.
recommended speed chart
Light mixes e.g. batters, milkshakes,
Thicker mixes e.g. sauces, pâtés
Place the fresh fruit and liquid ingredients in
first (includes yoghurt, milk and fruit juices)
Then add ice or frozen ingredients (includes
frozen fruit, ice or ice cream)
Automatic pulsing action
Operates the motor in a start/stop action. The
motor keeps running for as long as the button
is pushed in, this allows you to control the
texture of various foods e.g. Pâtés
Don't process spices – they may
damage the plastic.
The machine won't work if the
blender is fitted incorrectly.
3 eggs + 450ml