Use your blender for soups,
sauces, drinks, pâtés,
mayonnaise, dressings etc.
Liquids should be allowed to cool
to room temperature before
Switch off and unplug:
before fitting or removing parts
Keep hands and utensils out of the
blender when it's on the power
Don't touch the sharp blades.
Never use a damaged machine.
Get it checked or repaired: see
'service and customer care'.
Never use an unauthorised
Never leave the machine on
When removing the blender from
the power unit:
wait until the blades have
don't accidentally unscrew the
goblet from the blade unit.
Never run the blender empty.
Always unplug your blender
when not in use.
Only operate the blender with the
lid in place.
Misuse of your blender can result
This appliance is not intended for
use by persons (including children)
with reduced physical, sensory or
mental capabilities, or lack of
experience and knowledge, unless
they have been given supervision
or instruction concerning use of
the appliance by a person
responsible for their safety.
Children should be supervised to
ensure that they do not play with
Only use the appliance for its
intended domestic use. Kenwood
will not accept any liability if the
appliance is subject to improper
use, or failure to comply with these
before plugging in
Make sure your electricity supply is
the same as the one shown on the
underside of the machine.
Important – UK only
The wires in the cord are coloured
Green and Yellow = Earth,
to use your blender
Blue = Neutral,
Brown = Live.
1 Fit the sealing ring - ensuring the
The appliance must be protected
seal is fully located under the rim
by a 3A approved (BS1362) fuse.
of the blade unit. Leaking will
WARNING: THIS APPLIANCE
occur if the seal is damaged
MUST BE EARTHED.
or not fitted correctly.
2 Clip the blade unit into the base.
For non-rewireable plugs the fuse
3 Screw the goblet onto the blade
cover MUST be refitted when
replacing the fuse. If the fuse cover
is lost then the plug must not be
1 - 2
used until a replacement can be
obtained. The correct fuse cover is
identified by colour and a
replacement may be obtained
3 - 4
from your Kenwood Authorised
Repairer (see Service).
If a non-rewireable plug is cut off it
must be DESTROYED
IMMEDIATELY. An electric shock
hazard may arise if an unwanted
non-rewireable plug is
inadvertently inserted into a 13A
This appliance conforms to EC
directive 2004/108/EC on
Electromagnetic Compatibility and
EC regulation no. 1935/2004 of
27/10/2004 on materials intended
for contact with food.
before using for the first
To ensure long life of your blender,
never run it for longer than 60
1 Remove all packaging.
seconds. Switch off as soon as
2 Wash the parts: see 'cleaning'.
you've got the right consistency.
4 Put your ingredients into the
5 Push the lid seal onto the
dual action locking lid
underside of the lid.
6 Fit and lock the filler cap in the lid,
by turning one position
7 Fit the lid to the goblet and turn
the filler cap to
The filler cap can be located in 3
different positions (see
- filler cap removable for
adding ingredients to the goblet.
- lid unlocked/filler cap
locked to the lid for fitting and
removing the lid.
- lid locked.
8 Place the blender onto the power
9 Plug in and the off switch "0" will
10 Select a speed and the relevant
number will light up.
recommended speed chart
Light mixes e.g. batters, milkshakes,
Thicker mixes e.g. sauces, pâtés
Place the fresh fruit and liquid ingredients in
first (includes yoghurt, milk and fruit juices)
Then add ice or frozen ingredients (includes
frozen fruit, ice or ice cream)
Automatic pulsing action
Operates the motor in a start/stop action. The
motor keeps running for as long as the button
is pushed in, this allows you to control the
texture of various foods e.g. Pâtés
Don't process spices – they may
damage the plastic.
The machine won't work if the
blender is fitted incorrectly.
3 eggs + 450ml