Use your blender for soups,
before plugging in
sauces, drinks, pâtés,
Make sure your electricity supply is
mayonnaise, dressings etc.
the same as the one shown on the
underside of the machine.
before using your Kenwood
Important – UK only
Read these instructions carefully
The wires in the cord are coloured
and retain for future reference.
Remove all packaging and any
Green and Yellow = Earth,
Blue = Neutral,
Brown = Live.
The appliance must be protected
by a 3A approved (BS1362) fuse.
Allow all liquids to cool to room
temperature before placing them
WARNING: THIS APPLIANCE
in the blender.
MUST BE EARTHED.
Switch off and unplug:
before fitting or removing parts
For non-rewireable plugs the fuse
cover MUST be refitted when
replacing the fuse. If the fuse cover
Keep hands and utensils out of the
blender when it's on the power
is lost then the plug must not be
used until a replacement can be
obtained. The correct fuse cover is
Don't touch the sharp blades.
Never use a damaged machine.
identified by colour and a
Get it checked or repaired: see
replacement may be obtained
from your Kenwood Authorised
Never use an unauthorised
Repairer (see Service).
If a non-rewireable plug is cut off it
must be DESTROYED
Never leave the machine on
IMMEDIATELY. An electric shock
When removing the blender from
hazard may arise if an unwanted
the power unit:
non-rewireable plug is
inadvertently inserted into a 13A
wait until the blades have
don't accidentally unscrew the
This machine complies with
European Economic Community
goblet from the blade unit.
Never run the blender empty.
Always unplug your blender
before using for the first
when not in use.
Only operate the blender with the
1 Wash the parts: see 'cleaning'.
lid in place.
Do not let infirm people use the
appliance without supervision.
Do not let children use or play with
Only use the appliance for its
intended domestic use. Kenwood will
not accept any liability if the appliance
is subject to improper use, or failure
to comply with these instructions.
4 Put your ingredients into the
5 Push the lid seal onto the
underside of the lid.
dual action locking lid
6 Fit and lock the filler cap in the lid,
by turning one position
7 Fit the lid to the goblet and turn
the filler cap to
The filler cap can be located in 3
different positions (see
adding ingredients to the goblet.
locked to the lid for fitting and
to use your blender
removing the lid.
1 Fit the sealing ring - ensuring the
8 Place the blender onto the power
seal is fully located under the rim
of the blade unit. Leaking will
9 Select a speed.
occur if the seal is damaged
or not fitted correctly.
2 Clip the blade unit into the base.
3 Screw the goblet onto the blade
recommended speed chart
Light mixes e.g. batters, milkshakes,
Thicker mixes e.g. sauces, pâtés
Place the fresh fruit and liquid ingredients in
first (includes yoghurt, milk and fruit juices)
Then add ice or frozen ingredients (includes
frozen fruit, ice or ice cream)
Operates the motor in a start/stop action. The
pulse will operate for as long as it is held in
Don't process spices – they may
To ensure long life of your blender,
damage the plastic.
never run it for longer than 60
The machine won't work if the
seconds. Switch off as soon as
blender is fitted incorrectly.
you've got the right consistency.
- filler cap removable for
- lid unlocked/filler cap
- lid locked.
3 eggs + 450ml