LG LE1004 Use Manual page 15

1. Hard disk installation or replacement
A.
Hard disk installation
After turning on the power of the device, unplug the power from the outlet
①
Loosen the screw on the left, right and rear side of the product
②
Separate the cover of the main unit
③
Remove the screws on the bracket holding
the hard disk, separate the bracket from the
.
hard disk
④
Install the hard disk to the bracket and tighten the 4 screws
▶ Connecting bracket to hard disk
Set the SATA cable connection port to lower
direction to install the hard disk to the
bracket.
Connect the bracket marked as "L" to the
left side of hard disk.
Connect the bracket marked as "R" to the
right side of hard disk.
⑤
After installing the bracket on the main unit, tighten the screws
⑥
Connect the power cable of the hard disk
Chapter 1 Before use
.
.
.
.
.
.
1-9