LG LE1004 Use Manual page 4

Table of Contents

Advertisement

Please read the following precautions carefully before installing the product and follow the directions for
Do not install the product where the level of humidity, dust or smoke is high.
Do no install the product where it is exposed to direct sunlight or close to the heating device.
Do not install the product where there is danger of electric shock or near magnetic object.
Do not install the product where the temperature is too high (40°C or above) or too low (0° or less).
Do not put objects with high conductivity on top of the ventilation outlet of the product.
Make sure the power is turned off before installing the product..
Secure sufficient space to connect the product when installing the product.
Do not install the product where it is not flat, not ventilated well or where vibration is severe.
When you install the product near electronic appliances such as radio or TV, it can cause problems to the product.
Do not disassemble the product unless done by a technician certified by LG Electronics.
Do not put heavy objects on top of the product.
Be careful not to let alien particles get inside
the product.
- It can cause a problem to the product.
Install the product where it is ventilated well.
- The product at least 15cm away from the
wall power outlet because the cable can be
damaged.
Do not install the product at a location close
to a product or broadcast receiver with
strong electric or magnetic wave.
Do not put heavy objects on top of the
product.
- It can cause a problem to the product.
Install the product at a flat and stable
location.
- The product may not operate normally.
The product at a location with appropriate
level of temperature and humidity.
- Do not install the product where the
temperature is too high (40°C or above) or
too low (0° or less).
Because the vibration and impact can
damage the product, do not throw any
objects to the location where the product is
installed.
Do not install the product where it is
exposed to direct sunlight or close to the
heating device.
Caution
Firmly fixate the product at a location
where it is well ventilated.
- It can cause problems to the product
depending on the surrounding
environment. It is recommended to use
the Automatic Voltage Regulator. It is
recommended to wrap wires around the
Ferrite core.
The power outlet must be grounded.
If you hear any noise or smell any odor
from the product, turn the product off and
contact your nearest service center.
- It can cause a fire or an electric shock.
Periodically have the product checked by
the service center to safety use the product
- When replacing the battery, always
replace with the same type of battery as
the one provided. When disposing the
battery, follow the direction of the
manufacturer.
- LG Electronics is not responsible for the
problem from misuse by the user
Do not move or flip the product over while
using the product.
installation.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents