Connecting With A Hdmi Mini Cable - Panasonic HC-V10 Operating Instructions Manual

∫ To watch images on a regular
TV (4:3) or when both sides of
the images do not appear on
the screen
Change the menu setting to display the
images correctly. (Check the TV setting.)
: [SETUP] # [TV ASPECT] # [4:3]
≥ When this setting is set to [4:3] and the
unit is connected to a television using the
AV cable, the image may appear in a
shrunken form.
Example of images with a [16:9] aspect
ratio on a regular TV (4:3)
[TV ASPECT] setting
[16:9]
≥ If a wide-screen TV is connected, adjust
the aspect setting on the TV. (Refer to the
operating instructions of the TV for
details.)
Refer to the following support site for information about the Panasonic TVs that you
can directly insert an SD card into the SD card slot on the TV and then play it back.
http://panasonic.net/
≥ For details on how to play back, please read the operating instructions for the TV.

Connecting with a HDMI mini cable

Select the desired method of HDMI output.
: [SETUP] # [HDMI RESOLUTION] # [AUTO]/[720p]/[576p]
≥ [AUTO] determines the output resolution automatically based on information from the
connected TV.
If the images are not output on the TV when the setting is [AUTO], switch to the method
[720p] or [576p] which enables the images to be displayed on your TV. (Please read the
operating instructions for the TV.)
≥ When [REC MODE] is set to [640k480/50p] mode, video will be output in 576p, even if
[HDMI RESOLUTION] is set to [720p].
(the menu display will turn to [AUTO] or [576p])
∫ To display the on-screen
When the menu setting is changed, the
information displayed on the screen
(operation icon and time code etc.) can be
displayed/not displayed on the TV.
desired setting
[SIMPLE]*:
[DETAIL]:
[OFF]:
* This setting is only available in recording
[4:3]
mode.
information on the TV
: [SETUP] # [EXT. DISPLAY] #
Information partially
displayed
All information
displayed
Not displayed
63
VQT4C38