Wind Cut; Mic Level - Panasonic HC-V10 Operating Instructions Manual

[WIND CUT]

This is for reducing the wind noise coming into the built-in microphones.
≥ Switch to Manual Mode. (l 48)
: [RECORD SETUP] # [WIND CUT] # [ON]
≥ This function's default setting is [OFF].
≥ When switching to Intelligent Auto Mode, [WIND CUT] is set to [OFF], and the setting
cannot be changed.
≥ You may not see the full effect depending on the recording conditions.

[MIC LEVEL]

When recording, the input level from the built-in microphones can be adjusted.
≥ Switch to Manual Mode. (l 48)
1 Select the menu.
: [RECORD SETUP] # [MIC LEVEL] # desired setting
[AUTO]:
[SETr ]:
[SET]:
2
r
(When [SET
Press 2/1 to adjust.
≥ Adjust the microphone input level so that the
last 2 bars of the gain value are not red.
(Otherwise, the sound is distorted.) Select a
lower setting for microphone input level.
3 Press the ENTER button to determine
the microphone input level and then
press the MENU button.
(Microphone input level meter)
≥
appears on the screen.
≥ In Intelligent Auto Mode this setting is set to [AUTO] and cannot be changed.
≥ The microphone input level meter shows the larger of the inputs from the 2 built-in
microphones.
≥ You cannot record with the audio completely muted.
46
VQT4C38
AGC is activated, and the recording level is adjusted
automatically.
The desired recording level can be set.
AGC is activated, reducing noise.
The desired recording level can be set.
You will be able to record natural-sounding audio.
]/[SET] is selected)
A Left
B Right
C Microphone input level