Connecting With A Hdmi Mini Cable - Panasonic HC-V270 Operating Instructions Manual

∫ To watch images on a regular
TV (4:3) or when both sides of
the images do not appear on
the screen
Change the menu setting to display the images
correctly. (Check the TV setting.)
: [SETUP] # [TV ASPECT] # [4:3]
MENU
Example of images with a [16:9] aspect ratio
on a regular TV (4:3)
[TV ASPECT] setting
[16:9]
≥ If a wide-screen TV is connected, adjust the
aspect setting on the TV. (Refer to the
operating instructions of the TV for details.)
Refer to the following support site for information about Panasonic TVs with an SD card
slot for playing back your pictures.
http://panasonic.net/
≥ It may not be possible to play back scenes on the TV depending on the [REC MODE].
≥ For details on how to play back, please read the operating instructions for the TV.

Connecting with a HDMI mini cable

Select the desired method of HDMI output.
: [SETUP] # [HDMI RESOLUTION] # [AUTO]/[1080p]/[1080i]/[576p]
MENU
≥ [AUTO] determines the output resolution automatically based on information from the connected
TV.
If the images are not output on the TV when the setting is [AUTO], switch to the method [1080p],
[1080i] or [576p] which enables the images to be displayed on your TV. (Please read the
operating instructions for the TV.)
≥ Images may not be displayed on the television for several seconds in some cases, such as when
changing between scenes.
∫ To display the on-screen
When the menu setting is changed, the
information displayed on the screen (operation
icon etc.) can be displayed/not displayed on the
TV.
desired setting
[SIMPLE]*:
[DETAIL]:
[4:3]
[OFF]:
* This setting is only available in Motion Picture
- 97 -
information on the TV
: [SETUP] # [EXT. DISPLAY] #
MENU
Information partially
displayed
Detailed information
displayed
Not displayed
Recording Mode or Still Picture Recording
Mode.