Dividing A Scene To Partially Delete - Panasonic HC-V10 Operating Instructions Manual

Dividing a scene to partially delete

This divides the recorded scenes in two and deletes the front half or back half.
The scenes that were deleted after division cannot be recovered.
≥ Change the mode to
1
Select the menu.
: [EDIT SCENE] # [SPLIT&DELETE]
2
Select the scene you wish to divide using the cursor button and
press the ENTER button.
3
Select to set the dividing point.
≥ It is convenient to use Slow-motion Playback and
Frame-by-frame Playback. (l 52)
≥ Set to at least 2 seconds for the portions to be
deleted and at least 3 seconds for the portion that
is to remain.
4
Select the part for deletion, then press the ENTER button.
5
Select [YES] and press the ENTER button to confirm (play back) the
part for deletion.
≥ A confirmation message appears when [NO] is selected.
Proceed to Step 7.
6
Stop the playback.
≥ A confirmation message appears.
7
Select [YES] and press the ENTER button.
≥ To continue dividing and deleting other scenes, repeat Steps 2-7.
To complete dividing
≥ Press the MENU button.
≥ It may not be possible to divide scenes with a short recording time.
≥ The actual division may slightly slip off the previously designated dividing point.
.
0h00m15s 0h00m15s 0h00m15s
59
VQT4C38