Nat - TP-Link Archer C7 User Manual

User Name - Type the user name that you want to give access to the USB drive. The user

name must be composed of alphanumeric symbols not exceeding 15 characters in length.
Password - Enter the password in the Password field. The password must be composed of

alphanumeric symbols not exceeding 15 characters in length. For security purposes, the
password for each user account is not displayed.
Confirm Password - Re-enter the password here.

Storage Authority – Choose Read and Write or Read Only from the drop-down list to

assign access authority of Storage Sharing to the user.
FTP Access – Choose Yes or No from the drop-down list to decide whether the user can

access FTP Server or not.
Save - You can click the SAVE button to save your settings.

Back - You can click the Back button to discard the settings and just go to the media server

configuration page.

Note:
1. Please restart the service for the new settings to take effect.
2. If you cannot use the new user name and password to access the shares, press Windows
logo + R to open the Run dialog box and type net use \\192.168.1.1 /delete /yes and press
Enter. (192.168.1.1 is your router's LAN IP address. If the LAN IP of the modem connected
with your router is 192.168.1.x, the default LAN IP of the router will automatically switch from
192.168.1.1 to 192.168.0.1 to avoid IP conflict; in this case, please try net use \\192.168.0.1
/delete / yes.)

4.11 NAT

Choose "NAT", and you can enable or disable the NAT and Hardware NAT Control feature. The
NAT Rules and Hardware NAT will work properly only when the NAT Control feature is enabled.
Enable NAT Control - If enabled, the NAT function and the Forwarding configuration will

take effect.
Archer C7 AC1750 Wireless Dual Band Gigabit Router
Figure 4-64 The Forwarding menu
- 73 -