TP-Link Archer C7 User Manual page 71

Confirm Password - Re-enter the password here.

Storage Authority - Authority of user: Read Only or Read and Write.

Name - This folder's display name.

Partition - The volume that the folder resides. Volume 1-8 is mapping to USB port 1, Volume

9-16 is mapping to USB port 2.
Folder - The real full path of the specified folder.

You can edit the share folder by clicking Edit.
You can delete the share folder by clicking Delete.
Follow the instructions below to set up your Guest Network Storage Sharing:
1. Plug an external USB hard disk drive or USB flash drive into this Router.
2. Make sure the Service Status on the page "USB Settings -> Storage Sharing" is Started.
3. Make sure the Access shared storage with password on the page "USB Settings -> Storage
Sharing" is Enabled.
4. Click the Start button to start the Guest Network Storage Sharing.
5. Click the Add New Folder to Share button to specify a folder to share for the guests.
There is one default user account that can access the Guest Network Storage Sharing. Clicking
Modify on Figure 4-45, there will pop up Figure 4-46, where you can change the password and
storage authority of the account.

Note:
1. If you want guests visit folders of Guest Network Storage Sharing with guest account, you
must enable Access shared storage with password on the page "USB Settings -> Storage
Sharing", or the guests can't access to the Guest Network Storage Sharing.
2. The max share folders number is 6. If you want to share a new folder when the number has
reached 6, you can delete a share folder and then add a new one.
Archer C7
Figure 4-46 Modify User Account of Guest Network
AC1750 Wireless Dual Band Gigabit Router
- 61 -