Ipv6 Status - TP-Link Archer C7 User Manual

There are two submenus under the IPv6 Support menu (shown in Figure 4-111): IPv6 Status and
IPv6 Setup. Click either of them, and you will be able to scan or configure the corresponding
function. The detailed explanations for each submenu are provided below.

4.20.1 IPv6 Status

The IPv6 Status page displays the router's current IPv6 status and configuration. All information
is read-only.
 WAN
Connection Type - The IPv6 connection way for WAN
•
IPv6 Address - The WAN IPv6 address
•
IPv6 Default Gateway - The router's default gateway
•
Primary IPv6 DNS - The primary IPv6 DNS address
•
Secondary IPv6 DNS - The secondary IPv6 DNS address
•
 LAN
IPv6 Address Assign Type - There are two types of assignation for IPv6 address:
•
SLAAC (Stateless
Configuration Protocol for IPv6) Server.
SLAAC
IPv6 Address Prefix -The Prefix of IPv6 Address
DHCPv6 Server
Release Time - the length of time a network user will be allowed to keep connecting to
the router with the current DHCPv6 Address. Enter the amount of time (in seconds) that
the DHCPv6 address will be leased. The time range is 1~691200 seconds. The default
value is 86400 seconds.
IPv6 Address - Displays the LAN IPv6 Address.
Archer C7 AC1750 Wireless Dual Band Gigabit Router
Figure 4-112 IPv6 Status
address auto-configuration)
- 109 -
and DHCPv6 (Dynamic Host