TP-Link Archer C7 User Manual page 62

Disable Security - If you do not want to use wireless security, check this radio button. But it's

strongly recommended to choose one of the following modes to enable security.
WPA/WPA2-Personal - It's the WPA/WPA2 authentication type based on pre-shared

passphrase. The router is configured by this security type by default.
Version - you can choose the version of the WPA-PSK security on the drop-down list.
•
The default setting is Automatic, which can select WPA-PSK (Pre-shared key of WPA)
or WPA2-PSK (Pre-shared key of WPA) automatically based on the wireless station's
capability and request.
Encryption - When WPA-PSK or WPA is set as the Authentication Type, you can select
•
either Automatic, or TKIP or AES as Encryption.

Note:
If you check the
find a notice in red as shown in
Archer C7
Figure 4-35 Wireless Security
WPA/WPA2-Personal
Figure
AC1750 Wireless Dual Band Gigabit Router
radio button and choose TKIP encryption, you will
4-36.
- 52 -