Antari Z-800 II User Manual
  1. Manuals
  2. Brands
  3. Antari Manuals
  4. Fog Machine
  5. Z-800II
  6. User manual

Antari Z-800 II User Manual

Z series ii
Hide thumbs
1
2
3
4
5
Table of Contents

Advertisement

Quick Links

Download this manual
ORDER DIRECTLY TODAY AT:
Antari Z 800II, Z-1000II & Z-1020 Fog Machine
Congratulations on the purchase of your new

Introduction

Thank you for choosing ANTARI Z-Series II Fog Machine. You now own a rugged and powerful state-of-
the-art machine. Prior to use, we suggest that you carefully read all of the instructions. By following the
suggestions found in this user manual, you can look forward to the reliable and satisfactory performance of
your ANTARI Fog Machine for years to come.
Please follow these operation, safety and maintenance instructions to ensure a long and safe life for your
fog machine.
CAUTION:
Risk of electric shock. Disconnect the appliance from the electric supply before refilling liquid, cleaning or
performing maintenance on the machine.
Danger of Electric Shock
Keep this device dry.
For inside use only. Not designed for outside use.
For the 110V models, use 3-prong grounded electrical outlet only. Prior to use take care to determine that
the unit is installed at the rated voltage.
Always unplug your ANTARI Z-Series II Fog Machine before filling its tank.
Always keep fog machine in upright position.
Turn off or unplug the machine when not in use.
This machine is not water-proof. If moisture, water, or fog fluid gets inside the housing, immediately unplug
the unit and contact a service technician or your ANTARI dealer before using it again.
No user serviceable parts inside. Refer to your ANTARI dealer or other qualified service personnel.
Danger of Burns
For adult use only and must be installed out of the reach of children. Never leave the unit running
unattended.
Never aim the output nozzle directly at people.
Fog machine output is very hot. Avoid coming within 60 cm of the output nozzle during operation.
Locate the fog machine in a well-ventilated area. Never cover the unit's vents. In order to guarantee
adequate ventilation, allow a free air space of at least 20 cm around the sides and top of the unit.
Never aim the output nozzle at open flames.
If the supply cord is damaged, it must be replaced by manufacturer or its service agent or similarly qualified
personnel in order to avoid a hazard.
www.BulbAmerica.com
User Manual
ANTARI Z-Series II FOG MACHINE.
2
or CALL TOLL FREE 888-505-2111

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Z-800 II and is the answer not in the manual?

Questions and answers

Related Manuals for Antari Z-800 II

Summary of Contents for Antari Z-800 II

  • Page 1 ORDER DIRECTLY TODAY AT: www.BulbAmerica.com or CALL TOLL FREE 888-505-2111 User Manual Antari Z 800II, Z-1000II & Z-1020 Fog Machine Congratulations on the purchase of your new ANTARI Z-Series II FOG MACHINE. Introduction Thank you for choosing ANTARI Z-Series II Fog Machine. You now own a rugged and powerful state-of- the-art machine.
  • Page 2 ORDER DIRECTLY TODAY AT: www.BulbAmerica.com or CALL TOLL FREE 888-505-2111 The output nozzle becomes very hot during operation (300°C). Keep flammable materials at least 50 cm away from the nozzle. Always allow your ANTARI Fog Machine to cool down before attempting to clean or service it. Danger of Explosion Never add flammable liquids of any kind (such as oil, gas, perfume) to the fog liquid.

  • Page 3: Remote Control Operation

    ORDER DIRECTLY TODAY AT: www.BulbAmerica.com or CALL TOLL FREE 888-505-2111 If your model includes a mounting bracket designed for overhead installation, it may be installed at floor level or suspended overhead. If the unit is to be mounted using the bracket, it is important that the fog does not shoot directly at any one’s face.
  • Page 4 ORDER DIRECTLY TODAY AT: www.BulbAmerica.com or CALL TOLL FREE 888-505-2111 Do not allow the fog liquid to become contaminated. Always replace the caps on the fog liquid container and the fog machine liquid tank immediately after filling. After every 40 hours of continuous operation, it is recommended to run a cleaning solution composed of 80% distilled water and 20% white vinegar through the system to prevent the accumulation of particulate matter in the heating element.
  • Page 5 ORDER DIRECTLY TODAY AT: www.BulbAmerica.com or CALL TOLL FREE 888-505-2111 Antari Z-1000II & Z-1020 on-board DMX Fog Machine Settings DMX Setting for Z-1000II and Z-1020 fog machines with on board DMX Channel A 0 - 5 = OFF 6 – 249 = Volume Control (5% - 95%) 250 –...

This manual is also suitable for:

Z-1020 iiZ-1000 iiZ-800iiZ-1020Z-800iiZ-1020 ... Show all

Table of Contents