Citrus Press - Kenwood FP480 series User Manual

to use the cutting discs
1 Fit the drive shaft and bowl onto the power unit.
2 Holding by the centre grip d , place the disc onto the
drive shaft with the appropriate side uppermost
3 Fit the lid.
4 Choose which size feed tube you want to use. The
pusher contains a smaller feed tube for processing
individual items or thin ingredients.
To use the small feed tube - first put the large pusher
inside the feed tube.
To use the large feed tube - use both pushers
together.
5 Put the food in the feed tube.
6 Switch on and push down evenly with the pusher -
never put your fingers in the feed tube.
hints
G
Use fresh ingredients
G
Don't cut food too small. Fill the width of the large feed tube fairly full. This
prevents the food from slipping sideways during processing. Alternatively use
the small feed tube.
G
When using the chipper disc, place ingredients horizontally.
G
When slicing or shredding: food placed upright
placed horizontally g .
G
There will always be a small amount of waste on the plate or in the bowl after
processing.
f

citrus press

26
Use the citrus press to squeeze the juice
from citrus fruits (eg oranges, lemons, limes
and grapefruits).
cone
sieve
to use the citrus press
1 Fit the drive shaft and bowl onto the power
unit.
2 Fit the sieve into the bowl - ensuring the sieve
handle is locked into position directly over
the bowl handle .
h
3 Place the cone over the drive shaft turning
until it drops all the way down
4 Cut the fruit in half. Then switch on and
press the fruit onto the cone.
G
The citrus press will not operate if
the sieve is not locked correctly.
e
.
e
comes out shorter than food
f
g
.
i
mill
(FP580 only)
27
Use the mill for milling herbs, nuts and coffee beans.
d
blade unit
sealing ring
jar
sprinkler lid
safety
G
Never fit the blade unit to your machine without the jar fitted.
G
Never unscrew the jar while the multi-mill is fitted to your
machine.
G
Don't touch the sharp blades. Keep the blade unit away
from children.
G
Never remove the multi-mill until the blades have completely
stopped.
important
G
To ensure long life of your mill, never run for longer than 30
seconds. Switch off as soon as you've got the right consistency.
G
Don't process spices - they may damage the plastic.
G
The machine won't work if the mill is fitted incorrectly.
G
Use for dry ingredients only.
to use your mill
1 Put your ingredients into the jar. Fill it no more than half full.
2 Fit the sealing ring into the blade unit.
3 Turn the blade unit upside down. Lower it into the jar, blades down.
4 Screw the blade unit onto the jar until it is finger tight.
5 Place the mill onto the power unit and turn to lock (see "to use your liquidiser").
6 Switch on to maximum speed or use the pulse control.
7 After milling, you can replace the blade unit with the sprinkler lid and shake out
your food.
G
The sprinkler lid is not airtight.
hints
G
Herbs are best milled when clean and dry.
i
h
4