Rec Mode Key - Kenwood DM-5090 Instruction Manual

The recording-related settings can be adjusted precisely by selecting the proper display modes.
24

REC MODE key

Selecting the setting adjustment mode
1 Switch the REC MODE on.
2 Select the setting adjustment mode.
3 Set the selection.
4 Adjust the setting value.
To change another setting, press the SET key.
(This returns to step 2 above.)
To end the setting adjustment, press the REC
MODE/CHARA. key again.
REC MODE
/CHARA.
JOG DIAL
4 ¢
SET
JOG DIAL
4 ¢
Each press switches the mode.
1 REC MODE : off
2 REC MODE : on ("AUTO TIME?" displayed.)
The modes are switched by rotating the JOG DIAL.
1 AUTO TIME?
: Setting of the time for detecting a no-sound
blank section during automatic track num-
ber marking.
2 AUTO LEVEL?
: Setting of the level for detecting a non-
sound blank section during automatic track
number marking.
3 REC= WRITING? : Setting of the UTOC writing after recording.
÷ Step 4 consists of adjusting the setting of the "Setting adjustment
mode" selected in step 2.
Recording-related keys
DM-5090 (En)