Changing The Displayed Contents; Time Display Key; Text Display Key - Kenwood DM-SE7 Instruction Manual

30

Changing the displayed contents

TIME DISPLAY key

This key allows to switch the mode of time display.
TIME
DISPLAY
One will light.
SINGLE TOTAL
0 0 1 - 1 : 2 3
Indication of the remaining time

TEXT DISPLAY key

When a disc corresponding to CD-TEXT is inserted into a system-connected CD player (DP-SE7 or DP-SE9),
the recorded text information (data) at the same time can be read in and displayed on the side of this unit.
1 Select the CD input on the amplifier.
2 Stop the CD and the MD.
3 Select "DIGITAL 1" with the REC INPUT key.
REC
INPUT
4 Press the TEXT DISPLAY Key.
TEXT
DISPLAY
¶ The text information (data) is cleared when the disc is
removed from the CD player or when the MD REC
INPUT is switched.
REMAIN DIGITAL 1 2
CD TEXT
L
( dB)
30 10 5 3 1 0
R
§
Each press switches the time display modes.
1 SINGLE(+) : Elapsed time of a track.
2 SINGLE(–) : Remaining play time of a track.
3 TOTAL(+) : Total elapsed time of the MD.
4 TOTAL(–) : Total remaining time of the MD.
5 REMAIN
: Remaining recording time of disc.
6 TITLE
: Disc title indication (at the time of stop)/
Track title indication (at the time of play-
back).
In record mode
1 SINGLE(+) : Elapsed recording time of the track
being recorded.
2 TOTAL(+) : Total elapsed time at the time of re-
cording.
3 REMAIN
: Remaining recording time of disc.
¶ "BLANK DISC" is displayed if the disc does not contain
any recording.
("NO TRACKS" is displayed if the disc has a title.)
REPEAT SINGLE
0 0 1
Each press switches the mode.
1 CD TEXT flashes (CD-TEXT display mode)
2 CD TEXT not lit (MD display mode)
Display after operation
TEXT LOAD : Data loading
CAN'T LOAD : Loading not possible
T I T L E
At the time of stop
At the time of playback : The track title is displayed.
DM-SE7(En)
Lights up
DIGITAL 1 2
0 : 0 1
L
30 10 5 3 1
R
p
"CD TEXT" blinks.
DIGITAL 1
CD TEXT
L
30 10 5 3 1
R
: The disc title is displayed.
( dB)
0
0 ( dB)