Kenwood DM-5090 Instruction Manual page 39

3
Execute the track combine operation.
4
Eject the Mini Disc.
Image of track combination
ENTER
0
Should be approx.
2 sec. or longer.
1 2 3
A B C
1 2
A B
Track No. and title of the second track are cleared.
Track No. and title of the first track are left.
Display after execution
"EDIT NOW!" : When editing is in progress
"COMPLETE!" : When editing is completed successfully
"CAN'T EDIT" : When editing is incomplete
÷ It takes a while until the execution completes.
÷ If editing has been started during playback, playback restarts automati-
cally from the current track.
÷ Track combining may sometimes be impossible due to the limitations
of the MD standard.
÷ If you execute an editing operation by mistake, the condition before
editing can be recovered by performing the "EDIT CANCEL" opera-
tion.
WRITING
Information is Mini Disc has been ejected.
being written.
While "WRITING" is displayed, do not apply shock
or vibration to the unit because information is
Note Note
being written on the Mini Disc.
4
D
Track No. is adjusted.
3
D
Editing
DM-5090 (En)
EJECT N O D I S C
39
‹