Kenwood DM-5090 Instruction Manual page 27

3
Select "AUTO" or "MANUAL".
4
Enter record-pause mode.
5
Adjust the recording level. (Main unit only)
1 Play the source to be recorded.
2 Adjust the recording level.
To decrease
level
6
Start recording.
1 Press the ¶ key.
Pressing the pause (8) key also allows to can-
cel record-pause mode and start recording.
2 Play the source to be recorded from the
beginning.
7
After recording, eject the Mini Disc.
AUTO/
MONITOR
MANU.
8 ¶
REC LEVEL
MIN @ @ @ MAX
To increase
level
8 ¶
0
Each press switches the mode.
1 goes off (AUTO) : Track numbers are marked automatically.
2 MANUAL
: Track numbers can be marked as desired.
L 40 30 21 18
R
PGM SEARCH
0 0 1
Extinguished in "AUTO" mode, lit in "MANUAL" mode.
÷ The unit enters record-pause mode automatically when the ¶ key is
pressed.
÷ Decrease the level if the red segments of the peak level meter light.
Recording is not possible if the following characters are displayed.
"DISC FULL" : Disc is full
\Erase undesired tracks.
"PROTECTED" : The accidental erasure protect tab is open.
\Close it.
"PLAY ONLY" : A playback-only Mini Disc is loaded.
\Load a recordable Mini Disc.
÷ When the EDIT / SPACE key is pressed during recording, a track
number is inserted in that position.
WRITING
Information is Mini Disc has been ejected.
being written.
÷ The eject (0)key is not accepted during recording.
While "WRITING" is displayed, do not apply shock
or vibration to the unit because information is
Note Note
being written on the Mini Disc.
Recording (ANALOG input)
DM-5090 (En)
15 12 9 7 5 3 1 0 OVER ( dB) ANALOG
1
MONITOR
MANUAL
‚w
EJECT N O D I S C
27
£
£
DIGITAL
2 3
32kHz
44.1kHz
48kHz
7
9