Kenwood DM-5090 Instruction Manual page 33

3
Execute the track reordering operation.
4
Eject the Mini Disc.
Image of track moving
To cancel the editing results (EDIT CANCEL)
To return the Mini Disc to the condition before it was loaded
in the unit, perform the following key operations before
ejecting the disc.
After canceling, the editing operation can be restarted from
the beginning.
ENTER
0
Track to be moved
Selected destination
A B
When moved to a position
before current position
D A
Inserted immediately before destination track
EDIT CANCEL
÷ Be careful for the editing results cannot be canceled after recording operation has been performed or the
"DISC ERROR" message has been displayed.
Display after execution
"EDIT NOW!" : When editing is in progress
"COMPLETE!" : When editing is completed successfully
"CAN'T EDIT" : When editing is incomplete
÷ It takes a while until the execution completes.
÷ If you execute an editing operation by mistake, the condition before
editing can be recovered by performing the "EDIT CANCEL" opera-
tion.
WRITING
Information is
being written.
While "WRITING" is displayed, do not apply shock
or vibration to the unit because information is
Note
Note
being written on the Mini Disc.
Selected destination
C D E F G
When moved to a position after current position
A B C E F G
B C E F G
SET
EJECT N O
Mini Disc has been ejected.
D
Inserted immediately after destination track
ENTER
Editing
DM-5090 (En)
33
‹
D I S C