Timer Operations; Timer Playback, Timer Recording - Kenwood DM-5090 Instruction Manual

Timer operations

Playback or recording can also be activated at the desired
time by using a commercially available timer.
Connect the power cords of the associated components so that their
power can be turned ON through the audio timer.
Also, be sure to read carefully the instruction manual of the timer.
Do not set timer recording in a way that the power is not turned ON
for more than 3 days; otherwise, the last recorded data may be
cleared.
Refer to "Memory backup". 8

Timer playback, timer recording

1
Turn the powers of the associated components ON.
2
Make preparations.
For timer playback
Load a prerecorded Mini Disc.
3
Set the amplifier volume.
For timer playback
1 Play the Mini Disc.
2 Adjust the amplifier volume.
3 Stop the disc.
4
Set the TIMER.
For timer playback
TIMER
REC OFF PLAY
5
Set the timer ON time.
For timer playback
Set the timer so that it sup-
plies power at the specified
time.
For timer recording
1 Load a recordable Mini Disc.
2 Receive the desired radio
station.
3 Select the desired source
with the REC INPUT key.
§
4 Adjust the recording level.
For timer recording
Minimize the amplifier volume.
For timer recording
TIMER
REC OFF PLAY
For timer recording
Set the timer so that the tuner
reception can be started at the
desired time of the day.
Amplifier
Audio cord
Audio cord
DM-5090
÷ Set the POWER key of the unit to ON.
÷ For timer recording, be sure to set the write protect tab to enable
recording.
÷ For timer recording, be sure to check the remaining recording time.
÷ When the set time comes, the disc playback or recording starts
automatically. (Also be sure to read the instruction manual of the
connected component carefully.)
÷ After having set the timer, be careful not to press the ON/STANDBY
key of the remote control unit to ON; otherwise the timer operation
would be activated.
DM-5090 (En)
Tuner
Audio timer
7
i
49