System Connections - Kenwood DM-5090 Instruction Manual

System connections

Make connection as shown below. When connecting the
related system components, refer also to the instruction
10
manuals of the related components.
Caution: Do not plug in the power lead until all connections
are completed.
Except for U.S.A., Canada
Caution regarding placement
To maintain proper ventilation, be sure to leave a space around the unit (from the largest outer dimensions including projections) equal to, or greater
than, shown below.
Left and right panels: 10 cm, rear panel: 10 cm
Audio cords
(DM-5090 optional)
DIGITAL input / output jacks
(OPTICAL)
Remove protective caps
from digital input/output
jacks before use.
1. Connect all cords firmly. If connections are loose, there could be loss of sound or noise produced.
2. When plugging and unplugging connection cords, be sure to first remove the power cord from the AC outlet. Plugging/unplugging
Notes Notes
connection cords without removal of the power cord can cause malfunctions or damage to the unit.
MD/DAT Integrated amplifier (optional)
REC PLAY
OUT IN
L
PHONES
R
DIGITAL
OUTPUT
OPTICAL COAXIICAL
Optical fiber cable
(DM-5090 optional)
LINE DIGITAL
REC PLAY
REC PLAY
IN OUT
IN OUT
1 OPT. 2 COAX. COAX. OPT.
L L
R R R
DIGITAL
REC PLAY
IN OUT
1 OPT. 2 COAX. COAX. OPT.
Remove cap.
Malfunction of microprocessor
If operation is not possible or erroneous display appears even
though all connections have been made properly, reset the
microprocessor referring to "In case of difficulty".
SYSTEM
CONTROL
CD player (optional)
COMPACT COMPACT
DIGITAL AUDIO DIGITAL AUDIO
MD recorder (optional)
DIGITAL
REC
IN
1 OPT. 2 COAX.
Optical fiber cable
(optional)
SYSTEM
AC 110 - AC 220 -
CONTROL
240V
120V '
DM-5090
÷ When connecting the audio cords (cords with pin plugs on each end), insert
the white plugs into the L (Left) jacks and red plugs into the R (Right) jacks.
System control cord
(CD player optional)
SYSTEM
CONTROL
System control cord
(DM-5090 optional)
'
DM-5090 (En)
p
TO WALL AC
OUTLET