Zanussi ZKI 245 User Manual page 19

Malfunction
The washer-dryer does not start:
The machine does not fill:
The machine fills then empties
immediately:
The machine does not empty and/or
does not spin:
Possible Cause / Solution
The door has not been closed.
• Firmly close the door.
The plug is not properly inserted in the power socket.
• Insert the plug into the power socket.
There is no power at the socket.
• Please check your domestic electrical installation.
The main fuse or the fuse in the plug has blown.
• Replace the fuse.
The selector dial is not correctly positioned and the
8
button has not been depressed.
• Please turn the selector dial and press the button
again.
10
The button has been selected.
• If the laundry are to be washed immediately, cancel
the delay start
The Child Safety Lock has been activated.
• Deactivate this function.
The water tap is closed.
• Open the water tap.
The inlet hose is squashed or kinked.
• Check the inlet hose connection.
The filter in the inlet hose is blocked.
• Clean the water inlet hose filter.
The door is not properly closed.
• Firmly close the door.
The end of the drain hose is too low.
• Refer to relevant paragraph in «water drainage»
section.
The drain hose is squashed or kinked.
• Check the drain hose connection.
The drain pump is clogged.
• Clean the drain pump.
The option «Rinse hold» has been selected.
• Select the draining or spinning programme
The laundry is not evenly distributed in the drum.
• Redistribute the laundry.
E40
E10
E10
E10
E40
E20
)
E20
8
19