Belling Hob Rotary UK Users Manual & Installation Handbook page 14

Installation Bracket advice
Secure the hob to the worktop by means
of the brackets provided, taking the thick-
ness of the worktop into account.
UNDERSIDE OF HOB
INSTALLATION POSITIONS
INSTALLATION POSITIONS
Depending on your appliance it will be
supplied with one of the following
installation packs;
Installation pack 1
4 x "U" shape installation brackets
4 x Spire clips
4 x No8 Screws
The spire clips must be fitted to the base
of the hob prior to fitting the installation
brackets.
1 Worktop
Bracket
2
Screw
3
Spire clip
4
installation
1
30mm
4
2
3
40mm
50mm
Installation pack 2
4 x cranked installation bracket
4 x Spire clips (70/90cm appliances only)
4 x No8 Screws
Depending on your appliance the cranked
bracket may or may not require the spire
clips detailed in pack 1. If your appliance
is not supplied with spire clips, the
installation brackets screw directly into
the base of the hob in the ported holes
provided.
4
70 & 90cm
Appliances only
1 Worktop
Bracket
2
Screw
3
Spire clip
4
Important;
Do not modify this appliance.
1
30mm
2
3
40mm
50mm