Dual Band Wireless PCI-E Adapter
Appendix B: Configuring the PC
In this section, we'll introduce how to install and configure the TCP/IP correctly in
Windows XP. First make sure your Ethernet Adapter is working, refer to the
adapter's manual if necessary.
1. Configure TCP/IP component
1) On the Windows taskbar, click the Start button, and then click Control
Panel.
2) Click the Network and Internet Connections icon, and then click on the
Network Connections tab in the appearing window.
3) Right click the icon that showed below, select Properties on the prompt
page.
4) In the prompt page that showed below, double click on the Internet
Protocol (TCP/IP).
- RNWD-N9003PCE-
Figure B-1
-49-
User's Manual