Table of Contents
Advertisement
Dual Band Wireless PCI-E Adapter
3.1.2.7 Auto Profile Selection Management
The auto selection feature allows the adapter to automatically select a profile
from the list of profiles and use it to connect to the network. To add a new profile
into the Auto Selected Profiles list, please follow these steps.
1. On the Profile Management screen (shown in Figure 0-2
Profiles....
2. The Auto Profiles Selection management window will appear (shown in
Figure 0-11) with a list of all created profiles in the Available Profiles.
3.
Highlight the profiles to add to auto profile selection, and click Add. The profile will appear in
the Auto Selected Profiles box.
4. Highlight a profile in the Auto Selected Profiles box.
5. Click Move Up or Move Down as appropriate.
Note:
The first profile in the Auto Selected Profiles box has highest priority, while the last profile
has the lowest priority.
6. Click OK.
7. Check the Auto Select Profiles checkbox on the Profile Management tab
- RNWD-N9003PCE-
Figure 0-11
-28-
User's Manual
), click Order
X
Advertisement
Table of Contents
