Chapter 4 Wps Configuration - Rosewill RNWD‐N9003PCE User Manual

Dual Band Wireless PCI-E Adapter - RNWD-N9003PCE- User's Manual

Chapter 4 WPS Configuration

WPS (Wi-Fi Protected Setup) function allows you to add a new wireless device to
an existing network quickly.
If the wireless Router supports Wi-Fi Protected Setup (WPS), you can establish a
wireless connection between wireless card and Router using either Push Button
Configuration (PBC) method or PIN method.

Note:
WPS function is not supported in Windows 7 OS.
First, the WPS software should be installed. Insert the Resource CD into your
CD-ROM drive. To continue, double-click My Computer, and then double-click
the CD/DVD drive where the installation CD was placed. Open N900PCE folder,
and double-click wps.exe. Then you will see Figure 0-1.
Figure 0-1
Then, please follow the step-by-step instruction to complete the WPS installation.
After that, WPS function can be enabled. Here we will introduce two ways to
configure the WPS.
-36-