Dual Band Wireless PCI-E Adapter
4.2 PIN method
There are two ways to configure the WPS by PIN method:
1) Enter a PIN into your AP device.
2) Enter the PIN from your AP device.
Following are the detailed configuration procedures of each way.
4.2.1 Enter a PIN into your AP device
1.
2.
Double-click the icon
and then you can see the welcome screen shown as Figure 0-3
Click Next to continue. Figure 0-6 will appear. Select the second
option and you will see the PIN value of the adapter which is
randomly generated. Click Next.
Open the Router's Web-based Utility and click WPS link on the left
of the main menu. Then
- RNWD-N9003PCE-
on the desktop to open the WPS Utility
Figure 0-6
will appear. Click Add device, then you
錯誤 ! 找 不 到 參照來 源。
-39-
User's Manual