Explanation Of Connections - Black Box 3-Channel DVI Extender Installation And Operation Manual

1 LED
2 LED Power
3 3-Channel DVI Extender TX
4 Switch
5 Air outlet
6 DVI OUT 1-3
7 Air intake
8 Power connector
9 Optical
10 RS232
11 DVI IN 1-3
12 3-Channel DVI Extender RX
13 DVI OUT 1-3
Lights up when the video signal is active
Lights up when the power supply is active
Label identifying the TX transmitter unit
Switches the power supply on and off
Ventilation duct where the heated outgoing air is vented.
Please do not cover!
Optional local connections for linking video output devices
to the TX transmitter unit
Ventilation duct for air intake in on both sides.
Please do not cover!
For connecting the supplied power cable
MTP®/MPO port for connecting the fi beroptic cable with
MTP®/MPO female / female plugs
RJ45 port for connecting the serial cable for device
confi guration and fi rmware updates
Input port for the video signal
Connection to the video source
Importing EDID (page 25)
Connecting cable included in deliverables
Label identifying the RX receiver unit
Output port for the digital video signal
Connection to video output device via connecting cable
3-Channel DVI Extender - Installation and Operation Manual

EXPLANATION OF CONNECTIONS

9