Convert Gas Pressure Regulator; Convert Oven Bake Burners - Maytag MGT8655XS03 Installation Instructions Manual

To Convert Gas Pressure Regulator
1. Locate gas pressure regulator at the rear of the range.
° _ _li
rli
A. Gas pressure regulator
IMPORTANT: Do not remove the gas pressure regulator.
2. Unscrew the regulator cap and remove the plastic cover.
3. Push the bake burner cover to the right.
4=
5.
A
A. Bakeburner cover
Lift up and remove oven bake burner cover.
Unscrew wing nut and remove oven baffle.
A. Plastic cover
B. Regulator cap
3. Flip the regulator cap over and replace the plastic cover.
A
......... "C
#
A. Natural gas position
B. LP gas position
C. Plastic cover
4. Screw the regulator cap securely back into place. Do not
overtighten.
To Convert Oven Bake Burners
To Convert Lower Oven Bake Burner:
1. Remove oven racks from inside the oven cavity.
2. Remove oven door. See "Oven Door" section in the Use and
Care Guide for oven door removal instructions.
A. Oven baffle
B. Wing nut
6. Remove the oven bake burner screw and set aside.
7. Gently set the bake burner to the side.
B
A. Igniter and wires
B. Bake burner screw
12